The influence of pulse-plasma treatment on the phase composition and hardness of Fe-TiB2-CrB2 coatings
Abstract
This work are presented the research results of pulse plasma treatment influence on the phase composition, hardness, roughness and element composition of coatings on the bases of Fe-TiB2-CrB2. The Fe-TiB2-CrB2 coatingwas depositedby detonation method. The following pulse-plasmatreatment was used to modify the structure and properties of the surface layers of the sprayed coating. The results of mechanical experiments showed that the hardness of Fe-TiB2-CrB2 coating increased after the treatment. On the basis of the X-ray analysis, it has been established that the increase of coating hardness is connected with phase transformations in a surface layer, in particular, with formation of oxide phases and increase of carbide particles quantity.
Recommended Citation
Kengesbekov, A. B.; Rakhadilov, B. K.; Tyurin, Yu. N.; Magazov, N. M.; Kylyshkanov, M. K.; and Sagdoldina, Zh. B. (2021) "The influence of pulse-plasma treatment on the phase composition and hardness of Fe-TiB2-CrB2 coatings," Eurasian Journal of Physics and Functional Materials: Vol. 5: No. 2, Article 9.
DOI: https://doi.org/10.32523/ejpfm.2021050209
References
Downloads
Published
Issue
Section
License
The Eurasian Journal of Physics and Functional Materials is an open-access journal. Articles published under the Creative Commons Attribution 4.0 International License (CC BY 4.0) may be shared, redistributed, and adapted, including for commercial purposes, provided that the terms of the license are followed, including appropriate attribution to the original authors and source.
License: https://creativecommons.org/licenses/by/4.0/
Copyright ownership and publication rights are governed by the terms applicable to each article and the relevant author agreement.
