Structure and properties of multilayer coatings based on CoCrAlY/Al2O3 obtained by detonation spraying
Abstract
Ceramic coatings are used to protect against high-temperature oxidation of metal products. The efficiency of the technology of detonation spraying of two-layer coatings of aluminum oxide ( Al2O3 ) and a heat-resistant alloy (CoCrAlY) on the surface of a sample made of steel 12X18H10T was studied. A multi-chamber detonation unit was used in the work, providing high speed (up to 1000 m/s) and a 60– 80% utilization rate of the sprayed material. We used an oxygen-neutral combustible mixture based on propane-butane. The coating material has a smooth gradient of properties from ceramic to sample substrate The complex of the obtained structural and physical-mechanical properties of the coating material makes it possible to predict its high performance under conditions of high-temperature oxidation. © 2022, Eurasian Journal of Physics and Functional Materials. All Rights Reserved.
Recommended Citation
Rakhadilov, B. K.; Tyurin, Yu. N.; Kolisnichenko, O. V.; Kakimzhanov, D. N.; and Zhurerova, L. G. (2022) "Structure and properties of multilayer coatings based on CoCrAlY/Al2O3 obtained by detonation spraying," Eurasian Journal of Physics and Functional Materials: Vol. 6: No. 3, Article 8.
DOI: https://doi.org/10.32523/ejpfm.2022060308
References
Downloads
Published
Issue
Section
License
The Eurasian Journal of Physics and Functional Materials is an open-access journal. Articles published under the Creative Commons Attribution 4.0 International License (CC BY 4.0) may be shared, redistributed, and adapted, including for commercial purposes, provided that the terms of the license are followed, including appropriate attribution to the original authors and source.
License: https://creativecommons.org/licenses/by/4.0/
Copyright ownership and publication rights are governed by the terms applicable to each article and the relevant author agreement.


